from Theron et al. in Nanotechnology in Water Treatment Applications

Developments, particularly in the fields of genomics and biotechnology in the last few years, have resulted in a wide range of molecular tools, principally based on the detection of nucleic acid material and its amplification. They offer a novel, more sensitive and specific way of detecting microorganisms. They can also identify organisms that would not be detected with current culture techniques and can be used to track new pathogenic entities, including variants of otherwise harmless microorganisms. There are probably very few groups of microorganisms that have not been detected with these amplification techniques and several test kits have already been commercialized. Despite the success of these molecular methods, several barriers must be overcome before they can be used to routinely assess water quality and the microbiological safety of drinking water. The relationship between detection by molecular approaches and the subsequent viability or infectivity of waterborne enteric pathogens remains a concern. In addition, methods used for purifying and concentrating the target microbes and their nucleic acids from water, so that they are free of contaminants that may interfere with the analysis, need further improvement, consolidation and simplification. Further research is also needed to develop and refine the prototype protocols into collaboratively tested methods that could be used routinely and expeditiously to evaluate the microbiological safety of water.

Owing to recent advances in nanoscience and nanotechnology, various different nanomaterials and devices have been developed that show great promise for diagnostic applications. Subsequently, many different nanotechnology-based diagnostic systems have been reported in the literature and many of these have the potential to become the next generation of diagnostic tools. Moreover, microfluidic chip-based systems such as the lab-on-a-chip technology should have a significant impact on environmental microbial monitoring by permitting detection and identification of targets within minutes at the sampling site with a sensitivity level of a single cell. However, some technical and practical problems need to be solved before their full potential can be realized. These include tight control over the synthesis and functionalization of nanomaterials, as small variations can change their properties and behaviour in diagnostic methods. Also, their implementation into routine functional devices remains a challenge, and note should be taken that many of the diagnostic systems must still be taken from proof-of-concept and evaluated with environmental samples. In this regard, some of the challenges that need to be resolved, in addition to those highlighted above, include sample processing, detection of multiple agents in a single sample, and improving the sensitivity and selectivity of the assays for application to complex environmental samples.

Tags: Lab-on-a-chip | Microbial Detection | Pathogen Detection | Biodiagnostics | Biodetection Assays | Biomolecular Detection